LG CM4590 - Programmed Playback

Operating 27
Operating
3
Programmed Playback
The program function enables you to store your
favorite les from any disc or USB device.
A program can contain 20 tracks/les for each media
(CD, USB 1,USB 2). Possible to save a total of 60
tracks/les.
1. Press PROGRAM/MEMORY on the remote
control in stop status.
2. Press C/V on the remote control to select a
track/le.
3. Press PROGRAM/MEMORY on the remote
control to save and select a next track/le.
4. Repeat steps 2 - 3 to store other tracks/les.
(You can modify the list by pressing
PRESET·FOLDER W/S on the remote control to
select the program number.)
5. Press PROGRAM/MEMORY on the remote
control once again.
To play the programmed list, press N after you
make the list.
When making or modifying the programmed
list, REPEAT mode is off.
,
Note
Deleting Programmed list
Deleting function only works in the edit mode.
1. Press PROGRAM/MEMORY on the remote
control in stop status.
2. Select a song by pressing PROGRAM/MEMORY
on the remote control or PRESET·FOLDER W/S
on the remote control repeatedly.
3. Press DELETE on the remote control while a
song is selected.
y Programmed list is cleared in the case below.
- Removing the disc or the USB device.
- Deleting or recording music les in the USB
device.
- Unplugging the Power cord.
y Program is switched off in the case below.
- Changing to a different function.
- Turning off and on the unit.
- Operating the numeric buttons on the
remote control.
,
Note