LG CM9950 - AUX OUT Connection and X-BOOM PLUS; AUX OUT Connection; X-BOOM PLUS

Connecting
17
Connecting
2
AUX OUT Connection
Connect an input of auxiliary device to the AUX
OUT (L/R) connector.
If your device has only one input for audio(mono),
connect it to the left audio jack on the unit.
Audio cable
X-BOOM PLUS
You can connect two units to play music together.
1. Connect AUX OUT connector on a unit to the
AUX IN connector on the other unit using
Audio cable.
2. Press and hold H/P MODE (X-BOOM PLUS) on
the unit connected through AUX OUT.
X-BOOM PLUS is displayed.
3. Rotate H/P VOL./SYNC SET clockwise or
counterclockwise to adjust Delay setting.
4. Press H/P MODE (X-BOOM PLUS) to save the
Delay setting.
y
This function is available in only CD, USB 1,
USB 2, BLUTOOTH or PORTABLE Function.
y
The initial Delay is 0 ms and the Delay
becomes to 30 ms when you press and hold
H/P MODE (X-BOOM PLUS). The connected
device’s Delay may dier. If Audio Sync is
not matched, adjust Delay of X-BOOM PLUS
to synchronize sound.
y
It is available to adjust the Delay from 0
ms to 100 ms. Synchronizing tempo is not
available depending on devices.
y
Delay value is saved when the unit turns o.
,
Note
Auxiliary device
MP3 player etc.