LG CM9960 - JUKE BOX Playlist Management; Creating JUKE BOX Lists; Editing and Deleting Playlists

Operating32
Operating
3
JUKE BOX Playback
JUKE BOX function enables you to make a playlist of
your favorite tracks/les from a disc or USB device
(USB 1). A playlist of up to 100 tracks/les can be
entered.
Making JUKE BOX list
It is supported only on stop status.
1. Press and hold JUKEBOX / MEMORY on the
remote control to enter the edit mode.
2. Select a track/file by pressing
C/V
on the
remote control or by turning SCRATCH/LEVEL
CONTROL, SEARCH KNOB on the A SIDE of the
unit.
3. Press JUKEBOX / MEMORY to save the track/
file.
4. Repeat steps 2 - 3 to store other tracks/files.
(You can modify the list by pressing
PRESET·FOLDER
W
/
S
on the remote control to
select the JUKE BOX program number.)
5. Press JUKEBOX / MEMORY once again.
To play the JUKE BOX list, press
d/M
after you make
the list.
When making or modifying the JUKE BOX list,
REPEAT mode is off.
,
Note
Enjoying JUKE BOX
Press JUKEBOX / MEMORY twice on stop status.
“JUKE BOX ON” appears on the display window. To
play JUKE BOX list, press
d/M
on the remote control
or
T
on the unit.
To cancel it, press JUKEBOX / MEMORY twice. “JUKE
BOX OFF” appears on the display window.
Editing JUKE BOX
It is supported only on stop status.
1. Press and hold JUKEBOX / MEMORY on the unit
to enter the edit mode.
2. Press PRESET·FOLDER
W
/
S
on the remote
control to select a track/file to edit.
3. Press
C/V
to save the track/file.
4. Press JUKEBOX / MEMORY.
5. Repeat 2 to 3 to store the other tracks/files.
6. Press JUKEBOX / MEMORY once again.
To play the JUKE BOX list, press
d/M
after you edit
the list.
Deleting JUKE BOX list
Deleting function only works in the edit mode.
1. Press and hold JUKEBOX / MEMORY on the
remote control to enter the edit mode.
2. Select a song by pressing PRESET·FOLDER
W
/
S
on the remote control repeatedly.
3. Press DELETE while a song is selected.
y
To check the status of JUKE BOX, press
JUKEBOX / MEMORY once. You can also
check it by the word “PROG.” on the display
window.
y
If there is no JUKE BOX list, “JUKE BOX
NONE” appears on the display window when
you press JUKEBOX / MEMORY.
y
JUKE BOX is switched off in the case below.
- Changing to a different function.
- Turning off and on the unit.
- Operating the numerical buttons on the
remote control.
- Playing a le by using SEARCH and
SCRATCH/LEVEL CONTROL, SEARCH
KNOB.
y
JUKE BOX list is cleared in the case below.
- Removing the disc or the USB device.
- Deleting or recording music les in the USB
device.
,
Note