LG Code Zero A9 Series - How to Use; Cleaning the Mop Nozzle; Drying the Water Tank

-26-
How to use
Cleaning of the Mop Nozzle
Clean the mop nozzle as below.
1
Separate the nozzle from the product and turn the
nozzle over.
2
Attach the crevice tool to the main body of the
vacuum to remove any foreign objects from its base.
3
Remove the remaining foreign objects using a wet
wipe or a tissue.
※
Foreign matter remaining on the nozzle may result in a
bad smell.
WARNING
•
Make sure to separate the nozzle from the main body or
separate the battery before cleaning.
Otherwise the mop attachment plate may rotate and
result in injury.
CAUTION
•
Do not clean or submerge the nozzle with water. It may
result in product damage.
Drying the water tank
Open the 2 caps on the side of the water tank and shake
the water tank to remove the remaining water.
Drying thoroughly for over 24 hours in a well-ventilated
location with no direct sunlight is effective to remove
moisture from the water tank.
Please note
•
When cleaning is completed, always empty the water in
the water tank.
Otherwise the water may be contaminated and give off a
bad smell.
CAUTION
•
Turn the direction of the cap to prevent the cap of the
water tank from being closed.
•
Do not separate the cap of the water tank completely.
•
Do not add detergent, vinegar or baking soda to the water
tank when washing.