LG Code Zero A9 Series - How to Use; Cleaning Floor and Carpet Nozzles; Cleaning the Bedding Power Punch

-25-
How to use
Cleaning the Power Drive Floor/
Carpet Nozzle
Please clean the floor and carpet nozzles as follows:
1
Remove the nozzle from the product.
2
Turn the nozzle upside down and turn the rotating
brush removal screw counterclockwise.
•
Use a flat head screwdriver to turn the screw.
Rotating the brush
removal screw
3
Pull the brush in the direction of the arrow to remove it.
①
②
4
Attach the crevice tool to the unit and use the vacuum
to remove dust/foreign objects from the brush and
the bottom of the nozzle.
Rotating
brush
5
Use a wet towel or tissue to remove any remaining
foreign matter and dust from the brush and the
bottom of the nozzle.
Rotating
brush
6
Assemble the brush in reverse order after cleaning.
①
②
CAUTION
•
Avoid getting your finger stuck in any gaps when
reassembling.
•
Do not wash the rotating brush and the nozzle with water.
•
Do not use the rotating brush as a mop.
•
Do not use the nozzle to absorb any liquid.
Cleaning the Bedding Power Punch
1
Remove the Bedding Power Punch and turn it upside
down.
2
Attach the crevice tool to the unit and use the vacuum
to remove dust/foreign objects from the bottom of
the Bedding Power Punch.
3
Use a wet towel or tissue to move any remaining
foreign matter and dust.
WARNING
•
Do not wash the Bedding Power Punch with water.
•
Do not suck any liquids including water into the Bedding
Power Punch.