LG Code Zero A9 Series - How to Use; Cleaning Exhaust and Pre-Filters; Removing Internal Foreign Objects

-24-
How to use
3
Clean the exhaust filter by brushing the dust off or by
washing it in running water.
•
To maintain cleaning performance, remove the dust
from the exhaust filter at least once a month.
•
Wash the exhaust filter in running water if it emits
an odor.
•
The exhaust filter may emit an odor if it is not dried
completely after it has been cleaned in water. Make
sure to dry it completely for 24 hours in a well-
ventilated area out of the direct sunlight before
refitting it.
4
Clean the pre-filter by brushing the dust off or by
washing it in running water.
•
When washing the cloth type pre-filter with water, it
must be completely dry in a well-ventilated area out
of the direct sunlight before reinserting. Failing to
do so will cause it to emit odours.
•
As a spare pre-filter is provided for your convenience,
two pre-filters can be used alternatively if necessary.
•
The more often the filters are cleaned, the more
optimal the suction power will be.
•
Filters are consumables and will wear with time and
use. Please purchase more filters from an authorized
service center.
5
To refit the filters, attach the pre-filter first, followed
by the exhaust filter, so as to align the white circle,
and then turn it clockwise.
WARNING
•
Never wash the product's body with water as it may reach
the motor and result in electric shock or fire.
•
Make sure that no foreign object reaches the motor as it
will damage the product and may result in explosion or
fire.
•
Do not insert a finger or a sharp object near the motor
as it will damage the product and may result in injury or
electric shock.
CAUTION
•
Make sure to reattach the exhaust filter and pre-filter
to the product after washing them. Using the product
without these filters will allow dust to reach the motor
inside the product and cause malfunction.
Please note
•
As too much dust will reduce the suction power, we
recommend cleaning the filters before and after using the
product.
※
Removing foreign objects from inside the
product
In order to maintain product performance, be sure to re-
move any foreign objects and dust from inside the product
(body, pre-lter, extension pipe, inlet port). The foreign
materials inside the product can cause the product to
shutdown during operation, generate noise, or cause poor
suction.
Pre-lter
Foreign
objects
Product body
Foreign objects
Product body
Pre-lter
Foreign
objects
Extension pipe Inlet port
Foreign
objects
Foreign
objects
※ If the inside of the product body, extension pipe, or inlet
port or the pre-lter itself is clogged with foreign objects,
the power automatically turns off to protect the product.
Separate the battery from the product and remove the
foreign objects.