-23-
How to use
Cleaning the the Dustbin
1
Remove the battery from the unit before cleaning the
dustbin.
2
Please empty the dustbin next to a wastebasket or
where dust and foreign objects can be emptied easily.
3
Press the dustbin button downward to open it.
•
Empty the bin.
•
Be careful as dust/foreign matter may spill out when
you open the dustbin.
Dustbin Button
4
Insert the crevice tool into the large dust separation
device and turn it counterclockwise to remove it. Use
the suction end of the crevice tool to do this with ease.
5
Wash the dust separation device with running water.
•
Be sure to dry the device completely before using it.
Large dust
separation
device
6
Remove the dust separation device and use the
combination tool to clean out the dust inside the dustbin.
Combination Tool
WARNING
•
Never wash the product's body with water. Water may
reach the motor and cause electric shock or fire.
•
Do not apply force or any impact to the dust bin parts or
the dust separation device as it may damage them.
•
Use the product only after cleaning the dust separation
device and reassembling it on the product. Failure to do so
will damage the product.
Cleaning the Filters
The pre-filter and exhaust filter need to be cleaned at least
once a month to maintain the cleaning performance of the
product. Clean these filters frequently when used in dusty
environments and when the cleaner is used regularly.
1
Turn the exhaust filter counterclockwise to remove it
and take out the pre-filter.
Exhaust lter
Pre-lter
2
With the unit upside down, use the combination tool
to clear dust from the motor part once the Dust
separator filter has been removed.
Combination
Tool
To Next Page
Loading...
