- 21 -
Copyright © 2019 - 2020 LG Electronics Inc.
All rights reserved. Only training and service purposes.
1. List of Functions & Accessory
1. 4-Way Ceiling Cassette Indoor
Part 2 Functions & Controls
Category Functions TM-A / TP-B TQ / TR TY
Air flow
Air supply outlet 4 4 Round
Airflow direction control (left & right) X X X
Airflow direction control (up & down) Auto Auto O
Auto swing (left & right) X X X
Auto swing (up & down) O O O
Airflow steps (fan/cool/heat) 4 / 5 / 5 4 / 5 / 5 4 / 5 / 4
Chaos wind(auto wind) X X X
Jet cool/heat O/ O O/ O O/ X
Swirl wind O O O
Refresh Mode*** O X X
Smart Mode*** O X X
Indirect Wind O X X
Direct wind O X X
Air
purification
Triple filter (Deodorizing) X X X
Air purify (Plasma)
O
X X
Air purify (Ionizer) X X X
Allergy Safe filter X X X
Long-life prefilter (washable)
O O O
Installation
Drain pump
O O O
E.S.P. control* X X X
Electric heater X X X
High ceiling operation*
O O O
Reliability
Hot start
O O O
Self diagnosis
O O O
Convenience
Auto changeover
O
(Single Only)
O
(Single Only)
O
Auto cleaning
O O O
Auto operation(artificial intelligence) O(Multi Only) O(Multi Only) X
Auto Restart
O O O
Child lock*
O O O
Forced operation
O O O
Group control*
O O O
Sleep mode
O O O
Timer(on/off)
O O O
Timer(weekly)*
O O O
Two thermistor control*
O O O
Special
Functions
Wi-Fi
O
(Accessory)
O
(Accessory)
O
(Accessory)
Comfort Coolng (Humidity Control)
O
X O
Wireless Remote Controller
O
(Accessory)
O
(Accessory)
O
(Accessory)
Wired Remote Controller
O
(Accessory)
O
(Accessory)
O
(Accessory)
Network Solution(LGAP)
O O O
Note
1. O : Applied, X : Not applied
Accessory : Ordered and purchased separately the accessory package referring to the model name provided and install at field.
Accessory line-ups varies by region, so check your local catalogue or local sales material.
2. Some functions can be limited by remote controller.
3. Selecting a wireless remote controller in case of ducted type indoor units requires either a connection to the wired remote controller (RS2)
or an IR receiver accessory to be connected to the duct in order to receive the signal.
4. * : These functions need to connect to the wired remote controller.
5. ** : It is included by default when the product is manufactured.
6. *** : This functions need to connect to the Standard III wired remote controller.
To Next Page
Loading...
Need help?
General
