- 42 -
Copyright © 2019 - 2020 LG Electronics Inc.
All rights reserved. Only training and service purposes.
5.5 Child Lock Function
5.6 Forced operation
• To operate the appliance by force in case when the remote control is lost, the forced operation selection switch is on
the main unit of the appliance, and operate the appliance in the standard conditions.
• The operating condition is set according to the outdoor temp. and intake air temperature as follows.
• The unit select the last operation mode in 3 hours.
• Operating procedures when the remote control can't be used is as follows :
- The operation will be started if the ON/OFF button is pressed.
- If you want to stop operation, re-press the button.
Indoor temp.
over 24 °C
21~24 °C
below 21 °C
Setting temp.
22 °C
23 °C
24 °C
Setting speed of
indoor fan
High speed
Operating Mode
Cooling
Healthy Dehumidification
Heating
It is the function to use preventing children or others from careless using.
Press button repeatedly until
the is flashing.
1
If moving to 'setup' icon area by using button,
'setup' icon blinks, and child lock function is setup if
pressing button at that time.
2
When cancelling lock function, if moving to 'cancel' icon by pressing
button and then, pressing button, child lock function is
cancelled.
3
Press button to exit.
❈ After setup, it automatically gets out of setup mode if there is no
button input for 25 seconds.
❈ When exiting without pressing set button, the manipulated value is
not reflected.
4
Part 2 Functions & Controls
To Next Page
Loading...
Need help?
General
