C
Christian Romero MDAug 13, 2025
What to do if my LG D1452WF does not start?
- CChristopher LeeAug 13, 2025
If your LG Dishwasher doesn't start, make sure the door is fully closed and that you have pressed the start button.
To Next PageTo Next PageWhat to do if my LG D1452WF does not start?
If your LG Dishwasher doesn't start, make sure the door is fully closed and that you have pressed the start button.
Why no lights come on my LG D1452WF?
If no lights come on when you turn on your LG Dishwasher, check that the plug is properly inserted into the socket and that the fuses haven't blown or the circuit breaker hasn't tripped. If the electricity from the house was cut off, call for service.
How to fix spray arms if they don't rotate smoothly in LG D1452WF?
If the spray arms in your LG Dishwasher do not rotate smoothly, it's likely that the mounting of the spray arms is blocked by food particles. Clean the holes of the spray arm to resolve this issue.
How to get rid of odor from my LG D1452WF Dishwasher?
If your LG Dishwasher has an odor, and it's not used daily, it's recommended to run a Quick cycle once or twice a day until you have a full load. If the odor persists, run a vinegar rinse through an Auto cycle by putting 2 cups (500ml) of white vinegar in an upright measuring cup in the lower rack, without detergent.
What to do if the display shows OE code on my LG D1452WF Dishwasher?
If the display of your LG Dishwasher shows the OE code, it means water is not being pumped away. This could be due to a kinked drain hose (straighten it) or a clogged filter (clean it). If these steps don't resolve the issue, it might indicate motor trouble, and you may need to call for service.
Why does my LG D1452WF display the IE code?
If the display of your LG Dishwasher shows the IE code, it means that water is not being supplied. Ensure that the water tap is open and functioning correctly. If the issue persists, it could indicate a problem with the water sensor, and you may need to call for service.
What does EI code mean on my LG D1452WF Dishwasher?
If the display of your LG Dishwasher shows the EI code, it indicates that the drain pump is operating automatically, which usually means there's a water leak. Close the water tap and unplug the power plug. This could be due to water leaking from the hose connections. If the issue persists, it might indicate damage to the unit caused by a water leak, in which case you should call for service.
Why are there white deposits on my LG Dishwasher after washing?
If white deposits are left on your dishes after washing in your LG Dishwasher, it could be due to several reasons. Check the detergent or rinse-aid to ensure the amount is set correctly. Also, verify that the salt container is not empty and that the salt container cap is securely screwed on.
General| Brand | LG |
|---|---|
| Model | D1452WF |
| Category | Dishwasher |
| Language | English |
Guidelines for preparing the installation space, including dimensions and clearance.
Instructions for safe electrical connections, including circuit requirements and grounding.
How to check water hardness and set the dishwasher's water softener level.
Methods to determine the water hardness in your area for proper setting.
Instructions on adjusting the dishwasher's water softener setting based on hardness level.
How to load cutlery for the energy test, specifying placement and arrangement.
How to load the upper rack for the energy test, including dish placement and height.
How to load the lower rack for the energy test, specifying dish placement and arrangement.
Guidance on how to properly load dishes, cutlery, and other items for daily use.
How to check and refill the rinse aid dispenser using the indicator window or control panel.
How to refill the salt container when the indicator lamp turns on.
The first step to turn on the dishwasher and prepare for operation.
Checking indicator lights for rinse aid and salt levels before starting a cycle.
Ensuring filters are clean and properly positioned for optimal washing results.
Proper loading of dishes and cutlery into the lower and upper racks.
Checking that spray arms are not obstructed by loaded dishes for effective cleaning.
Adding the correct amount of detergent to the dispenser before starting the cycle.
Selecting the desired wash program and any option functions to begin operation.
What happens when the cycle finishes, including display messages and automatic shut-off.
Describes the Dual Spray cycle for mixed loads with varying spray intensities.
Explains the Auto program that adjusts settings based on soil level for efficiency.
Details the Eco program for energy and water-efficient washing of moderately soiled loads.
Describes the Care cycle using steam for gentle cleaning of delicate items.
Information about the Quick program for lightly soiled dishes and cutlery.
How the dishwasher resumes operation after a power failure.
Recommendations for maintaining the dishwasher during periods of non-use.
How to remove, clean, and reassemble the mesh, STS, and outer filters.
Instructions for checking and cleaning the upper spray arm.
Instructions for checking and cleaning the lower spray arm.
How to check and clean the filter in the water inlet hose connection.
Common problems, their possible causes, and solutions before contacting a service engineer.
