K
Kevin MartinAug 12, 2025
What to do if my LG D1454BF does not start?
- JjenniferruizAug 12, 2025
If the LG Dishwasher does not start, make sure the door is properly closed and press the start button.
To Next PageTo Next PageWhat to do if my LG D1454BF does not start?
If the LG Dishwasher does not start, make sure the door is properly closed and press the start button.
Why are there white deposits on my LG Dishwasher after washing?
If you notice white deposits on your dishwasher after washing, the amount of detergent or rinse-aid might be set incorrectly. Check the detergent or rinse-aid settings. Also, the salt container might be empty, or the salt container cap may not be securely screwed on. Inspect the salt container and cap.
What to do if streaks are left on glassware in my LG D1454BF Dishwasher?
If streaks are left on glassware, it could be due to too little rinse-aid being dispensed. Try filling the rinse-aid. You may also need to adjust the level of rinse-aid container.
Why no lights come on when the power is turned on in my LG Dishwasher?
If no lights come on when you turn on your LG Dishwasher, check the plug and the electricity supply. If problems persist, call for service.
How to fix LG Dishwasher spray arms that do not rotate smoothly?
If the spray arms of your LG Dishwasher do not rotate smoothly, it might be because the mounting of the spray arms is blocked by food particles. Clean the holes of the spray arm to resolve this issue.
Why does my LG D1454BF show the IE code?
If your LG Dishwasher displays the IE code, it means water is not being supplied. First, make sure that the water tap is open. If the issue persists, it could also indicate a problem with the water sensor, in which case you should call for service.
How to fix OE code on LG Dishwasher?
If your LG Dishwasher displays the OE code, it indicates that water is not being pumped away. This can happen if the drain hose is kinked, so try straightening it. Another possible cause is a clogged filter, so try cleaning it. If neither of those steps resolves the issue, there may be a motor problem, and you should call for service.
What to do if my LG Dishwasher shows the EI code?
If your LG Dishwasher displays the EI code, this means the drain pump is automatically operating, usually due to a water leak. Immediately close the water tap and unplug the power. It could be due to leaking hose connections. If you suspect the unit has been damaged by a water leak, call for service.
General| Type | Freestanding |
|---|---|
| Place Settings | 14 |
| Size | Full Size |
| Energy Efficiency | A++ |
| Noise Level | 45 dB |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Energy Star Certified | Yes |
| Control Type | Electronic |
| Delay Start | Yes |
| Child Lock | Yes |
| Drying System | Condensing |
