What to do if the LG D1451WF display shows OE code (water is not pumped away)?
If your LG Dishwasher displays an OE code, it means the water isn't being pumped away. This could be due to a kinked drain hose, a clogged filter, or motor trouble. Try straightening the hose and cleaning the filter. If the problem persists, it may require professional service.
What to do if my LG D1451WF display shows EI code (Automatically Drain pump operated)?
If your LG Dishwasher shows an EI code, it means the drain pump is operating automatically, likely due to a water leak. This could be from hose connections or damage to the unit. Close the water tap, unplug the power, and call for service.
Why are there streaks on glassware in my LG D1451WF?
If your glassware has streaks after being washed in your LG Dishwasher, it could be due to insufficient rinse-aid. Make sure that you fill the rinse-aid and adjust the level of rinse-aid container.
What to do if the LG D1451WF Dishwasher display shows IE code?
If the display of your LG Dishwasher shows an IE code, this indicates a water supply issue. Ensure the water tap is fully opened. If the issue continues, it might indicate a problem with the water sensor, and you may need to call for service.
Why is my LG Dishwasher leaving white deposits after washing?
White deposits on your dishes after washing in your LG Dishwasher could be due to several reasons. It may be that the detergent or rinse-aid amount is set incorrectly, the salt container is empty, or the salt container cap isn't securely screwed on. Check the detergent and rinse-aid settings, and ensure the salt container is properly filled and the cap is tight.
Why are there streaks left on glassware in my LG Dishwasher?
Streaks on glassware in your LG Dishwasher are often caused by too little rinse-aid being dispensed. Try filling the rinse-aid dispenser and adjusting the level to ensure proper dispensing.
What to check if no lights come on when the LG Dishwasher power is turned on?
If no lights come on when you turn on your LG Dishwasher, check if the plug is properly inserted into the socket. Also, verify that fuses haven't blown and the circuit breaker hasn't tripped. Finally, ensure that there isn't a power outage in your house. If problems persist, call for service.
Why are there white deposits on my LG D1451WF after washing?
If you find white deposits on your LG Dishwasher after washing, it could be due to an incorrect amount of detergent or rinse-aid being used. Check the detergent and rinse-aid levels. Also, verify that the salt container isn't empty and that the salt container cap is securely screwed on.
Why no lights on my LG D1451WF?
If no lights come on when you turn on your LG Dishwasher, check if the plug is properly inserted into the socket. Also, check your home's electricity supply, as blown fuses, a tripped circuit breaker, or a power outage could be the cause. If there is a problem with electricity, call for service.
What to do if spray arms don't rotate smoothly in LG D1451WF Dishwasher?
If the spray arms in your LG Dishwasher aren't rotating smoothly, food particles might be blocking their movement. Clean the holes of the spray arm.
General| Type | Freestanding |
|---|---|
| Capacity | 14 place settings |
| Energy Rating | A++ |
| Noise Level | 45 dB |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Number of wash programs | 6 |
| Control Type | Electronic |
| Color | White |
| Number of programs | 6 |
| Child lock | Yes |
| Drying System | Condensing |
| Size | Full-size |
| Delay start | Up to 19 hours |
To Next Page
