49
OPERATION
ENGLISH
• When the upper rack is in the lower position,
push in the upper rack first, and the lower rack
later.
• Pull out the lower rack first, and the upper rack
later.
• When the upper rack is in the lower position, the
possible height of dishes differs with models
where the cutlery rack is fitted.
Loading the Cutlery Rack
The cutlery rack is best suited for flatware and most
cooking or serving utensils. It can also fit small
prep bowls and lids. The separators on the cutlery
rack help keep utensils separated to avoid damage
and improve cleaning.
If the handles of your cutlery are too thick, then
reverse the pieces so that the handles face the
other direction.
Height Adjustable Tray
The tray on the left side can be adjusted to a high
or low position to accommodate utensils or cutlery
of different sizes. Remove dishes before adjusting
the tray. Adjust the tray by sliding the lever.
Removing the Cutlery Rack
The entire cutlery rack can be removed if more
space is needed on the upper rack for larger items.
Always remove the cutlery from the rack before
removing the rack.
Pull the rack out to the end of the rails. Then, lift the
front of the rack so that the rollers clear the stop on
the end of the rail. The rack can now be slid forward
and removed from the rails.
• Be careful when loading and unloading items
with sharp edges. Load sharp knives with the
blade down to reduce the risk of injury.
To Next Page
Loading...
Need help?
General
