LG DLEX3250 Series - Page 26

26
INSTALLATION INSTRUCTIONS
Connecting electric dryers (cont.)
USA only
Three-wire connection for electric dryers:
Power cord




the dryer. Install a UL-listed strain relief into the power cord
through-hole; then thread a UL-listed, 
 conductor power cord through the
strain relief.

 conductor and closed loop or forked
terminals with upturned ends.

terminal block screws. Attach the neutral wire to the center
terminal block screw. Connect the external ground (if required
by local codes) to the green ground screw. 
. Reinstall the terminal block access cover.
UL-Listed
Strain Relief
UL-Listed
3-Wire Power
Cord
Terminal

Ground
Screw
Neutral
(White)
Hot

Hot
(Red)
External Ground
Wire (If required
by local codes)
White Wire
from Dryer
harness
w
WARNING









