How to fix 'Invalid format' message on LG 3D TV?
If you see an 'Invalid format' message on your LG 3D TV, it means the signal from the PC is out of the vertical or horizontal frequency range. Adjust the frequency range by referring to the Specifications in this user’s guide.
Why LG LCD TV remote control doesn't work?
If your LG LCD TV remote isn't working, try these steps: First, check for obstructions between the remote and the TV. Then, make sure you are pointing the remote correctly. Verify that the batteries are correctly installed with the right polarity (+ to -, + to -). Ensure the correct remote operating mode is set (TV, VCR, etc.). Finally, try installing new batteries.
What to do if LG LCD TV has no picture and no sound?
If your LG LCD TV shows no picture and has no sound, first check if the TV is turned on. Try switching to another channel to rule out a broadcast issue. Ensure the power cord is properly inserted into the wall power outlet. Also, check your antenna's direction and/or location. Finally, test the wall power outlet by plugging another product into it.
Why does my LG DM2350D power suddenly turn off?
If your LG LCD TV is suddenly turning off, check these potential causes: See if the sleep timer is set. Review the power control settings. Consider if there was a power interruption. Note that the TV will automatically switch off after 15 minutes without an input signal to save power. Also, a broken file played in USB mode might cause this, so check your USB storage. Finally, make sure the screen off mode of the energy saving menu is disabled.
Why does picture appear slowly after switching on LG LCD TV?
The image is muted during the product startup process. If the picture has not appeared after five minutes, contact your service centre.
How to fix poor reception on some channels on LG LCD TV?
If you're experiencing poor reception on some channels with your LG LCD TV, it could be due to a few reasons. The station or cable product might be experiencing problems, so try tuning to another station. Alternatively, the station signal could be weak, so try reorienting your antenna to better receive the weaker signal. Also, check for any potential sources of interference.
How to remove lines or streaks in pictures on LG DM2350D?
To address lines or streaks in the picture on your LG LCD TV, check the antenna and try changing its direction.
Why is my LG LCD TV getting poor reception on some channels?
If you're experiencing poor reception on some channels with your LG LCD TV, tune to another station to rule out issues with the station or cable product. If the station signal is weak, try reorienting the antenna for better reception. Also, check for any potential sources of interference that might be affecting the signal.
Why is there no picture on my LG LCD TV when connecting HDMI?
If you have no picture when connecting HDMI to your LG LCD TV, ensure that you are using a High Speed HDMI cable. Using cables that are not High Speed HDMI cables can result in flickering or no screen display.
How to resolve ‘Invalid format’ message on LG DM2350D LCD TV?
If your LG LCD TV displays 'Invalid format' message, it means the signal from your PC (video card) is outside the product's vertical or horizontal frequency range. Adjust the frequency range by referring to the Specifications in this user’s guide.
Check your product box for items. Contact dealer for missing accessories.
How to connect HD receivers, DVD, VCR players, and gaming devices.
Steps for connecting USB storage devices and computers to the TV.
Steps to power on the TV and complete the initial setup process.
Important warnings and safety advice for viewing 3D content.
Advice on how to avoid permanent screen damage from static images.
Solutions for remote control, power, and general TV operation problems.
Troubleshooting steps for issues with picture display and video signals.
Solutions for sound output issues, including no sound or distorted audio.
Troubleshooting display and connection problems when using PC input.
Addressing problems like screen position, color, lines, and after-images.
Solutions for issues like lack of 3D display or incorrect image presentation.
Using Picture Wizard and advanced controls to optimize picture settings.
Solutions for issues like inability to view channels or delayed image display.
Troubleshooting sound issues, HDMI/USB connectivity, and PC connection problems.
To Next Page
General
