Copyright © 2011 LG Electronics. Inc. All right reserved. - 9 - LGE Internal Use Only
Only for training and service purposes
#7
Pull the key board out of bezel.
#8
Disassembly the FFC cable.
#9
Tear up the tapes to remove the MAIN_FRAME.
#10
Turn over the MAIN_FRAME and disconnect
the key board cable.
#11
Unscrew the screws (DVI just for E1941T).
#12
Unscrew the screws on power board.
.
#13
Unscrew the screw on main board.
#14
Remove the bezel.
To Next Page
Loading...
