Connecting the Display
5
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1. Place the monitor face down on the cushion or soft cloth.
3. Attach the monitor to the Stand Base by turning the screw to the right.
4
.
Once assembled take the monitor up carefully and face the front side.
2. Assemble the Stand Base into the Stand Body in the correct direction as shown in the picture.
Stand Base
Stand Body
Screw : Turn the
screw by using the
screw handle.
To Next Page
Loading...
Need help?
General
