Setting up the Monitor set
Attaching the Stand
1
Place the Monitor set with the screen side
down on a flat and cushioned surface.
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
y
This illustration depicts the general model of
connection. Your monitor may differ from the
items shown in the picture.
y
Do not carry the product upside down holding
only the stand base. The product may fall
and get damaged or injure your foot.
CAUTION
CAUTION
Detaching the Stand
1
Place the Monitor set with the screen side
down on a flat and cushioned surface.
2
2
Attach the Stand body and then attach the Stand
Base,then tighten the screw to the right with a
Coin.
Turn the screw to the left with a Coin, and then
pull out the Stand Base from the Stand Body,
then pull out the
Stand Body
from the Monitor
set .
5
ENG
ENGLISH
ASSEMBLING AND PREPARING
To Next Page
Loading...
Need help?
General
