LG E2242T - Menu Settings

Customizing Settings
Menu Settings
y
Analog: D-SUB(Analog signal) input.
y
Digital: DVI-D(Digital signal) input.
MENU
EXIT
R
WIDE / ORIGINAL
RESET
CONTRAST
BRIGHTNESS
NO
NEXT MENU
1 / 2
1 / 2
WIDE
NEXT MENU PICTURE
MENU
＞
＞
EXIT
5
SHARPNESS
A
12
ENG
ENGLISH
USING THE MONITOR SET
1
Press
MENU
button on the bottom of the Monitor set to
display
the
MENU OSD.
2

Settheoptionsbypressingthe◄or►or▼buttons.
3

Select the " " button to enter the more option
NEXT MENU
settings.
4
Select
EXIT
to leave the OSD menu.
To return to the upper menu or set other menu items, use
the up arrow ( ) button.
Each option is explained below.
Analog Digital Description
PICTURE
● ●
To adjust the sharpness of the screen
To customize the color of the screen
To adjust the position of the screen
To improve the clarity and stability of the screen
To customize the screen status for a user's operating
environment
COLOR
● ●
GAMMA
COLOR TEMP
DISPLAY
HORIZONTAL
VERTICAL
●
CLOCK
PHASE
●
OTHERS
LANGUAGE
POWER INDICATOR
● ●
WHITE BALANCE ●
SHARPNESS
Menu Description
BRIGHTNESS To adjust the brightness of the screen.
CONTRAST To adjust the contrast of the screen.
WIDE/ORIGINAL
RESET
WIDE
Switch to full screen mode according to input image signal.
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor
set ratio (16:9).
ORIGINAL
Restore all factory default settings .
Press the , buttons to reset immediately.
Analog Digital
● ●
● ●
● ●
● ●
MENU-->NEXT MENU
All manuals and user guides at all-guides.com