Why is the screen color mono or abnormal on my LG E2342C Monitor?
If the screen color on your LG Monitor is mono or abnormal, check the following: Ensure the signal cable is properly connected, using a screwdriver to fasten it if necessary. Also, make sure the video card is properly inserted in its slot. Finally, verify that the color setting is set higher than 24 bits (true color) in Control Panel ? Settings.
What to do if I see an 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on my LG Monitor?
If you see an 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on your LG Monitor, ensure that you install the display driver from the display driver CD (or diskette) that came with your display. Also, make sure to check if the video card supports Plug&Play function.
How to unlock OSD on LG Monitor?
To unlock the OSD controls on your LG Monitor, push the MENU button for several seconds until the message 'OSD UNLOCKED' appears.
Why is my LG E2342C Monitor screen color mono or abnormal?
If the screen color on your LG monitor is mono or abnormal, check that the signal cable is properly connected, tightening it with a screwdriver if needed. Also, ensure the video card is correctly inserted in its slot. Verify that the color setting is higher than 24 bits (true color) in Control Panel settings.
What to do if the screen color is mono or abnormal on my LG Monitor?
If the screen color on your LG Monitor is mono or abnormal, check if the signal cable is properly connected and tighten it with a screwdriver if necessary. Also, ensure that the video card is properly inserted in its slot. Finally, set the color setting higher than 24 bits (true color) in Control Panel ? Settings.
General| Screen Size | 23 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Panel Type | TN |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Viewing Angle | 170° (H) / 160° (V) |
| Power Consumption | 25W |
| Connectivity | D-Sub, DVI-D |
To Next Page
