LG EEV Kit - EEV Kit Installation; Pipe Cutting

10
EEV KIT INSTALLATION
ENGLISH
pipe cutting
1 Be sure to use a copper pipe cutter for the pipe cutting.
2 Remove any burrs.
(When cutting, have the pipe end tilted downward so that any burrs do not get inside of the
pipe.)
Copper
pipe cutter
90°
Incline Roughness
Pipe
Copper
pipe cutter
90°
Incline Roughness
Pipe
CAUTION
• Cut the cutting area in a straight line.
!
CAUTION
• The presence of burrs can result in refrigerant leakage, so be sure to remove any burrs
with a reamer.
• Cutting dust could lead to malfunctioning if it gets inside the pipe.
!