The phone will display “Vibrate only” On. If
you would like to turn Vibrate only Mode off,
touch and hold again.
Signal Strength
If you are inside a building, moving near
a window may give you better reception.
You can see the strength of your signal by
the signal indicator on your phone’s display
screen.
Entering Text
You can enter alphanumeric characters by
using the phone’s touch pad. For example,
storing names in the Address Book, writing a
message, or scheduling events in the calendar
all require text to be entered.
Changing the Text Input Mode
You can change the text input mode by
touching the Text Input Mode toggle button
on the touch screen.
The following text input modes are available
on the phone:
ABC Mode
This mode allows you to enter letters by
touching the key labeled with the required
letter once, twice, three, or four times until
the letter is displayed.
To Next Page
Loading...
