43
NOTE Your phone is based on the
Bluetooth
®
specification, but
it is not guaranteed to work
with aldevices enabled with
Bluetooth
®
wireless technology.
Your phone does not support
ALBluetooth
®
OBEX Profiles.
*Contact Name Cards, Calendar
events and other non-protected
data.
** For vehicle/accessory
compatibility go to www.
verizonwireless.com/
bluetoothchart.
Add New Device
Pairing is the process that allows
the handset to locate, establish,
and register 1-to-1 connection
with the target device.
For pairing with a new
Bluetooth
®
device
1. Follow the Bluetooth
®
accessory
instructions to set the device to
pairing mode.
2. Unlock the touch screen by
dragging
up and
touch the Menu Quick Key
.
3. Touch Settings
.
4. Touch Bluetooth Menu.
5. Touch
.
6. Touch Yes if prompted to turn
on Bluetooth. When prompted
to place the device you are
connecting to in discoverable
mode, touch
.
7. The device wilappear on the
screen. Once it has been
located, touch the device.
8. Touch
. The handset
may ask you for the passcode.
Consult the Bluetooth
®
accessory instructions for the
appropriate passcode (typically
“0000” - 4 zeroes). Enter the
passcode or verify that the
passcodes match.
9. Once pairing is successful,
touch either Always Ask or
Always Connect (except audio
devices).
10. Once connected, you wilsee
the device listed in the phone's
Bluetooth Menu. If your search
fails to find any pairing device,
or you want to search again,
touch to try
again.
To Next Page
Loading...
