26
9. DISASSEMBLY INSTRUCTIONS
Be sure to unplug the machine out of the outlet before disassembling and repairing the parts.
CONTROL PANEL
1
Unscrew 2 screws on the back of the top plate.
2
Pull the top plate backward and upward as shown.
1
Disconnect the PWB assembly connector from
Main lead wire assembly.
2
Pull out the drawer and unscrew 2 screws.
3
Push upper hooks down on the top and pull the
control panel.
1
Disconnect the PWB assembly (Main & Display)
from control panel by unscrewing 7 screws.
PLATE ASSEMBLY (TOP)
PANEL ASSEMBLY
(CONTROL)
Hook
To Next Page
Loading...
