Test operation
9
1
Preparation
for
washing.
·Connect the power plug to the
outlet.
·Connect the inlet hose.
2
Touch the power button.
3
Touch the START/PAUSE
button.
6
Check the water heating.
·Touch the Wash and Spin
button simultaneously and the
present temperature will be
displayed.
·Check if the drum rotates
clockwise and counterclockwise.
5
Check automatic reverse turn.
4
Check the water supply.
·Check if water is supplied through
the detergent dispenser.
7
Check the drain and spin
functions.
·Turn power off and then power on.
·Select the spin rpm
·Touch the START PAUSE button.
·Check the spin and drain
functions.
·Turn power off and then power on.
·To turn off, touch the power button
for 1sec
·Listen for a click to determine if the
door is unlocking.
8
Turn power off and open
the door.
9
Water removal.
·If SVC is needed during check,
remove the remaining water by
pulling out the hose cap.
·In case of Coloreds program.
To Next Page
Loading...
Need help?
General
