23
1. Press the Power button.
2. Touch the Spin button to select RPM.
3. Press the Start/Pause.
Spin only
• By touching the Temp. button the water
temperature can be selected.
- Cold
- 20°C, 30°C, 40°C, 60°C, 95°C
• Water temperature can be selected
according to the program.
Temp.
■ Options ■ Other functions
How to use washer
When you select "No Spin", it will still
rotate for a short time with low speed to
drain quickly.
NOTE
For better performance load 3 item or
less.
When Refresh cycle finishes, laundry
will continue to be tumbled slowly for up
to 30 minutes to prevent wrinkling. You
can open the door in this time by
pressing or touching any button.
NOTE
• Medic Rinse : For best results or for
cleaner rinsing.
• Rinse+Spin : This can be helpful in
preventing fresh stains from setting in
fabrics. This is a separate cycle.
Option1
• Time Save : This option can be used to
reduce the time of a wash program.
• Intensive : If the laundry is normal and
heavily soiled, “Intensive” option is
effective.
Option2
• Rinse
+
+Hold : Add rinse once then after
rinsing process, the course is paused until
start button is pressed again.
• Normal+Hold : The course is paused
until start button is pressed again when
rinse is finished.
• Rinse
++
: Add rinse twice.
• Rinse
+
: Add rinse once.
Rinse
1. Press the Power button.
2. Select a cycle.
3. Touch the Option button
(Rinse+Spin light up).
4. Press the Start/Pause.
Rinse+Spin
1. Press the Power button.
2. Select the Refresh program.
3. Touch the Steam Wash button
repeatedly until the correct item is
displayed.
4. Press the Start/Pause button.
Refresh Cycle
To Next Page
Loading...
Need help?
General
Weight and Dimensions
