LG F1495BDS User Manual

25
- - -
Time Left
Tub Clean
Rinse ---------
Tub Clean is a special cycle to clean the inside of the washing machine.
A higher water level is used in this cycle at higher spin speed. Perform this cycle regularly.
1. Remove any clothing or items from the
washer and close the door.
2. Open the dispenser drawer and add Anti
limescale(e.g. Calgon) to the main wash
compartment.
3. Close the dispenser drawer slowly.
4.
Power On and then touch and hold Tub
Clean
button for 3 seconds. then “Tub Clean”
will be displayed on the LCD display.
5. Press the Start/Pause button to start.
6. After the cycle is complete, leave the door
open to allow the washer door opening,
flexible gasket and door glass to dry.
•
“Door Lock” - For safety reasons, the
door will lock while machine is in use and the
“Door Lock” icon will light up. You can safely
open the door after the “Door Lock” icon
turns off.
•
While "Detecting" is shown on the
display the washing machine rotates slowly
and detects how much laundry is loaded in
the drum.
It will take a short time.
1%
- - -
Time Left
Detecting
B
A
Rinse 140040°C2
■ Tub Clean
■ Door Lock & Detecting
How to use washer
NOTE
• Do not add any detergent to the detergent compartments.
• Excessive suds may generate and leak from the washer.
CAUTION
• If there is a child, be careful not to leave the door open for too long.

LG F1495BDS Specifications

General

Water consumption per cycle	77 L
Energy consumption washing per cycle	1.43 kWh
Door color	Black
Door hinge	Left
Water fill	Cold
Control type	Buttons, Rotary
Display type	LCD
Loading type	Front-load
Product color	White
Built-in display	Yes
Door opening angle	120 °
Appliance placement	Freestanding
Washing class	A
Drum capacity	12 kg
Cycle time (max)	90 min
Maximum spin speed	1400 RPM
Minimum spin speed	400 RPM
Noise level (spin)	70 dB
Noise level (wash)	55 dB
Number of washing programs	-

Weight and Dimensions

Depth	640 mm
Width	600 mm
Height	842 mm
Weight	70000 g