23
7-3. HOW TO CHECK THE WATER LEVEL FREQUENCY
7-4. HOW TO CHECK THE TEMPERATURE OF EACH THERMISTOR
AT OPERATING CONDITION.
040 045 000
100 021 041
045 097 000
045 112 000
248 084 000
026 145 000
The digits indicate the water level frequency.
For example, if 255 is displayed
the water level frequency is 25.5kHz (255 X 0.1).
Data View Type : In case of ‘040’
Touch the Rinse
+
and Temp. button simultaneously.
If the knob is turned, the data view type is changed from 40 to 49
Touch the Temp. and Rinse Hold button simultaneously.
If the knob is turned, the data view type is changed from 40 to 49
040 045 000
100 021 041
045 097 000
045 112 000
248 036 000
026 145 000
Thermistor in tub temperature
Data View Type : In case of ‘040’