25
ERROR SYMPTOM CAUSE
MOTOR LOCKED
ERROR
• The connector in the LEAD WIRE ASSEMBLY is
not connected to the connector of STATOR
ASSEMBLY.
Reconnect or repair the connector.
• The hall sensor is out of order/defective.
Replace the STATOR ASSEMBLY Page 34
8
• Water leaks Page 36
9
POWER
FAILURE
WATER
LEAKAGE
• The washer experienced a power failure
Press the start/pause button
10
• The Dry Heater is out of order
• The Connector of the Dry Heater is not connected
properly to the cinnector in the Main PWB ASSEMBLY
• The Dry fan motor is out of order Page 37
DRY HEATER
ERROR
11
To Next Page
Loading...
