34
Dry Heater Error (dHE)
Is the Connector connected correctly to
the Main PCB and the Dry Heater or Fan Motor?
Or is the Harness alright?
Reconnect or repair the Connector.
Or replace the Harness.
Clean the Bellows.
Replace the Thermistor.
Is the resistance of t.he Thermistor out of range
2.5 ~ 180KΩ at 105 ~ 0°C?
YES
Disassemble the Cabinet cover and Condensing Bellows.
Is there any foreign object in Condensing Bellows?
Disassemble the Dry Fan Assy and Dry Duct Upper,
and clean foreign object in Duct and Fan.
Check for Dry Heater trouble. Page 38
Check for Dry Fan Motor trouble. Page 39
YES
NO
NO
NO
YES