20
Control Panel
A
B
C
Power button
•
Press the Power button to turn the washing
machine on.
•
Press and hold the Power button for 1 second
to turn the washing machine off.
Start/Pause button
•
This Start/Pause button is used to start the
wash cycle or pause the wash cycle.
•
If a temporary stop of the wash cycle is needed,
press the Start/Pause button.
Display
•
The display shows the settings, estimated
time remaining, options, and status messages.
When the product is turned on, the default
settings in the display will illuminate.
•
A
: The display shows estimate time
remaining. While the size of the load is being
calculated automatically, blinking or ‘Detecting’
appears.
•
B
: The water temperature is displayed when
pressing the Temp. button.
•
C
: The spin speed level is displayed when
pressing the Spin button.
Programme button
•
Programmes are available according to laundry
type.
•
Lamp will light up to indicate the selected
programme.
Options
•
This allows you to select an additional cycle
and will light when selected.
•
Use these buttons to select the desired cycle
options for the selected cycle.
To Next Page
Loading...
