LG F2721STWV User Manual

15
ENGLISH
3
Push the adapter onto the end of the tap so that
the rubber seal forms a watertight connection.
Tightentheadapterringplateandthefourxing
screws.
4
Pull the connector latch plate down, push the inlet
hose onto the adapter, and release the connector
latch plate. Make sure the adapter locks into place.
Latch plate
NOTE
•
After connecting the inlet hose to the water
tap,turnonthewatertaptoushoutforeign
substances (dirt, sand, sawdust, etc.) in the water
lines. Let the water drain into a bucket, and check
the water temperature.
Connecting Hose to Washing Machine
Make sure that there are no kinks in the hose and that
they are not crushed.
When your washing machine has two valves.
•
The Inlet hose with the red connector is for the hot
water tap.
NOTE
•
After completing connection, if water leaks from
the hose, repeat the same steps.
Use the most conventional type of tap for the
water supply. In case the tap is square or too big,
remove the guide plate before inserting the tap
into the adaptor.
Using the horizontal tap
Horizontal tap
Extension tap
Square tap

LG F2721STWV Specifications

General

Door hinge	Left
Motor type	Beltless
Control type	Rotary, Touch
Loading type	Front-load
Product color	Silver
Built-in display	Yes
Appliance placement	Freestanding
Connected load	2200 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Drum capacity	21 kg
Spin-drying class	-
Maximum spin speed	1000 RPM
Noise level (spin)	51 dB
Noise level (wash)	48 dB
Load balancing system	No
Number of rinse selections	5

Weight and Dimensions

Depth	835 mm
Width	700 mm
Height	990 mm
Weight	100000 g