To Next PageTo Next PageWhy is water not entering my LG Washer, or entering slowly?
If water is not entering your LG washing machine, or is entering slowly, it could be due to inadequate water supply, the water supply tap not being fully open, kinked water inlet hoses, or a clogged filter in the inlet hose. Check another tap in the house to ensure adequate water supply. Fully open the tap. Straighten any kinked hoses. Inspect and clean the filter of the inlet hose.
Why is my LG F2721STWV Washer oversudsing?
Too much detergent or unsuitable detergent may cause excessive foaming which may result in water leaks.
Why is my LG F2721STWV vibrating so loudly?
If your LG washer is making vibrating noises, try the following: Stop the washing machine and check the drum and drain filter. If the noise continues after restarting, contact an authorized service center. If the sound persists, the machine may be out of balance; stop it and redistribute the wash load. Ensure any transit bolts were removed during installation (refer to the Installation Guide). Also, make sure the washing machine is level and tighten the lock nuts towards the base.
General| Door hinge | Left |
|---|---|
| Motor type | Beltless |
| Control type | Rotary, Touch |
| Loading type | Front-load |
| Product color | Silver |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Connected load | 2200 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Drum capacity | 21 kg |
| Spin-drying class | - |
| Maximum spin speed | 1000 RPM |
| Noise level (spin) | 51 dB |
| Noise level (wash) | 48 dB |
| Load balancing system | No |
| Number of rinse selections | 5 |
Weight and Dimensions| Depth | 835 mm |
|---|---|
| Width | 700 mm |
| Height | 990 mm |
| Weight | 100000 g |
Mandatory grounding for electrical safety, detailing plug connection and qualified installation procedures.
Covers optimal installation location, clearance, power outlet, and safe electrical connection guidelines.
Instructions for safely unpacking the machine and removing transit bolts, critical for preventing damage.
Steps to properly level the machine and connect the water inlet hose for stable and efficient operation.
Guidelines for correctly installing the drain hose to ensure proper drainage and prevent leaks.
Table listing common symptoms, reasons, and solutions for issues like noise, leaks, and oversudsing.
Explanation of error codes displayed on the panel, their causes, and recommended solutions.
