3. TECHNICAL BRIEF
- 28 -
D. SIM interface
The AD6527B provides SIM Interface Module. The AD6527 checks status periodically during
established call mode whether SIM card is inserted or not, but it doesn't check during deep Sleep
mode. In order to communicate with SIM card, 3 signals SIM_DATA, SIM_CLK,
SIM_RST(GPIO_23)
are required. The descriptions about the signals are given by bellow Table 3-6 in detail.
E. Key interface
Include 5 column , 5 row. The AD6527B detects whether key is pressed or not by using interrupt
method.
F. AD6535 Interrupt
AD6535 provides an active-high interrupt output signal. Interrupt signals are generated by the
Auxiliary ADC, audio, and charger modules.
Signals Description
SIM_DATA
This pin receives and sends data to SIM card.
This model can support only 3.0 volt interface SIM card.
SIM_CLK Clock 3.25MHz frequency.
SIM_RST
Reset SIM block
(GPIO_23)
Table 3-5. SIM CONTROL SIGNALS DESCRIPTION
To Next Page
Loading...
