5. OPERATION
How to use washer
Control Panel
Power Button
• Press the Power button to turn the
washing machine on, or off if washing
hasn't commenced.
Start/Pause Button
• The Start/Pause button is used to start
the wash cycle or pause the wash cycle.
• If a temporary stop of the wash cycle is
needed, press the Start/Pause button.
Display
• The display shows the settings, estimated
time remaining, options, and status
messages. When the washer is turned on,
the default settings in the display will
illuminate.
• The display shows estimated time
remaining. While the size of the load is
being calculated automatically, the display
will blink before displaying the estimated
cycle time.
1
2
3
Programme Knob
• Programmes are available according to
the laundry type.
• The lamp will light up to indicate the
selected programme.
Options
• This allows you to select an additional
programme and will light when selected.
• Use these buttons to select the desired
programme options for the selected cycle.
Not all options are available with each
programme cycle.
• In order to use the Remote Start function,
refer to SMART FUNCTIONS.
4
5
SmartDiagnosis™ function is
available only for the products with
a SmartDiagnosis™ mark.
To Next Page
