1
Remove the back cover.
2
eht tuo llup ,rotoR ,tlob eht gninesool retfA
rotor.
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
• V ~ U (8~11Ω)
• U ~ W (8~11Ω)
• W ~ V (8~11Ω)
Motor Stator
1
Remove the 6 bolts from the stator.
2
Disconnect the 2 connectors.
1
Remove the hinges (Damper) at the Tub.
3
The hinge at the base is pulled off.
(In directions of the arrow)
2
The Hinge(Damper) at the base is pulled off by
pressing on the snaps at the sharp end.
U V W
56
To Next Page
Loading...
