14
INSTALLATION
temperature for a few hours before
putting it into operation.
Electrical Connection
• Do not use an extension cord or
double adapter.
• Always unplug the appliance and turn
off the water supply after use.
• Connect the appliance to an earthed
socket in accordance with current
wiring regulations.
• The appliance must be positioned so
that the plug is easily accessible.
• Power outlet must be within 1 meter of
either side of the appliance.
• Repairs to the appliance must only be
carried out by qualified personnel.
Repairs carried out by inexperienced
persons may cause injury or serious
malfunctioning. Contact your local
authorised LG repairer.
• The power plug must be plugged into
an appropriate outlet socket that is
installed and grounded/earthed in
accordance with all local codes and
ordinances.
Levelling the Appliance
Removing the Transit Bolt
Assemblies
• To prevent the appliance from severe
vibration and breakage, remove
transit bolts and retainers.
1
Remove the 4 transit bolts and rubber
spacers from the rear of the
appliance.
2
Loosen the transit bolts by turning
them anticlockwise with an
appropriate spanner.
3
Remove the transit bolts with a
straight pull.
4
Fit the plastic blanking caps supplied
in the accessories bag into the gaps
left by the removal of the transit bolts.
The transit bolts should be stored for
future use.
XX
44
X
4
1
3
2
4
To Next Page
Loading...
