18
OPERATION
OPERATION
Operation Overview
Using the Appliance
Before the first wash, select the
Cotton
wash programme and add a half
amount of the detergent. Start the
appliance without clothes. This will
remove possible residues and water
from the drum that may have been left
during manufacturing.
1
Sort clothes and load items.
• Sort clothes by fabric type, soil level,
colour and load size as needed.
Open the door and load items into
the appliance.
• Before closing the door, ensure that all
clothes and items are inside the tub
and not overhanging on the rubber
door seal where they will become
caught when the door is closed. Failing
to do so will cause damage to the door
seal and the clothes.
• Remove items from the flexible door
seal gasket to prevent clothing and
door seal damage.
2
Add cleaning products or detergent
and softener.
• Add the proper amount of
detergent to the detergent
dispenser. If desired, add bleach or
fabric softener to the appropriate
areas of the dispenser.
3
Plug your machine into the mains
supply and then turn on the water
supply.
4
Choose the desired cycle.
• Turn the cycle selector knob until
the desired cycle is selected.
• Now select a wash temperature and
spin speed. Pay attention to the
fabric care label of your clothes.
5
Begin a programme.
• Press the
Start/Pause
button to
begin the programme. The
To Next Page
Loading...
