31
OPERATION
ENGLISH
2
Press the
Delay
button as necessary.
3
Press the
Start/Pause
button.
• After selecting the delay function, you
can select other functions without
touching the
Start/Pause
button, and
then you can touch the
Start/Pause
button to enable time delay.
• To cancel the delay function:
- If you did not press the
Start/Pause
button, keep touching the
Delay
button until the electronic display
shows the duration of the program
you have selected. Once you see the
program time on the electronic
display, this means that the delay has
been cancelled.
- If you have pressed the
Start/Pause
button to start the machine, you just
need to touch the
delay
button once,
will go off on the electronic display,
press
Start/Pause
button to start the
washing cycle.
Energy/Water Efficiency Bar
Energy/Water Efficiency Bar is an
efficiency indicator comprising 2 bars.
The energy/water efficiency bar shows
the amount of energy and water
consumption. The bigger the bar is, the
more energy or water consumption you
will have. The energy/water efficiency
bar might extend or shorten depending
on the selected program’s duration,
temperature setting, spin speed and
other auxiliary functions.
Child Lock
The Child Lock function allows you to
lock the buttons so that the wash cycle
you have chosen cannot be changed
unintentionally.
To activate child lock
Press and hold the
Options
and
Save+ /
Speed
button simultaneously for at least
3 seconds.
CL
will flash on the electronic
display for 2 seconds when the child lock
is activated.
• If the child lock function is active and a
programme is running, when the
programme dial is turned to the “Off”
position and another programme is
selected the previously selected
programme continues from where it
was left.
To deactivate the child lock
Press and hold the
Options
and
Save+ /
Speed
button simultaneously for atleast
3 seconds until the
CL
symbol onthe
electronic display disappears.
• Door remains unlocked in case when
child lock is active and electricity is cut
off.
To Next Page
Loading...
