EasyManua.ls Logo

LG F4V5 YP2T Series - User Manual

LG F4V5 YP2T Series
48 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER'S MANUAL
WASHING MACHINE
Before beginning installation, read these instructions
carefully. This will simplify installation and ensure that the
product is installed correctly and safely. Leave these
instructions near the product after installation for future
reference.
ENGLISH
F4V5*YP2T
MFL72081823
Rev.00_092723
www.lg.com
Copyright © 2023 LG Electronics Inc. All Rights Reserved.

Table of Contents

Questions and Answers

  • C
    Caitlin WeaverAug 11, 2025
    Why does my LG Washer show UE UNBALANCE ERROR?
    • D
      Daniel GilbertAug 11, 2025
      The UE UNBALANCE ERROR on your LG washer typically means the load is unbalanced. This can happen because the clothes are too wet at the end of the cycle or because the load is too small. To fix this, rearrange the load to allow proper spinning, close the door, and press the Start/Pause button. If the load is too small, add 1 or 2 similar items or smaller articles of clothing to help balance the load. Close the door and press the Start/Pause button again. Remember, the door must be locked before the spin cycle can begin.
  • A
    Ariel CookAug 17, 2025
    Why does my LG F4V5 YP2T show a UE UNBALANCE ERROR?
    • J
      Jennifer ConradAug 17, 2025
      If you encounter a UE UNBALANCE ERROR on your LG Washer, it could be due to the laundry being too wet at the end of the cycle. Try rearranging the load to allow for proper spinning. Then, close the door and press the Start/Pause button. It might take a moment for the appliance to begin spinning, as the door must be locked first. Alternatively, if the load is too small, adding one or two similar or smaller items can help balance it. Again, close the door and press Start/Pause.
  • C
    christopherhowardAug 23, 2025
    What to do if my LG Washer shows a 1E INLET ERROR?
    • J
      Jasmin BryanAug 23, 2025
      If your LG Washer displays a 1E INLET ERROR, it indicates a problem with the water supply. First, check another tap in your house to ensure the water supply is adequate. Make sure the water supply tap is fully open. Inspect the water supply hoses for any kinks and straighten them, or reinstall the hose if necessary. Also, check and clean the filter of the inlet hose. Finally, if you have an aqua stop supply hose and notice water leakage with a red indicator, replace the hose.
  • M
    Maria ColeAug 29, 2025
    What to do if my LG F4V5 YP2T Washer shows 1E INLET ERROR?
    • A
      Ashley ButlerAug 29, 2025
      If your LG washer displays a 1E INLET ERROR, it indicates a water supply issue. Here's what you can do: * Check if the water supply is adequate by testing another tap in the house. * Ensure the water supply tap is fully open. * Make sure the water supply hoses are not kinked; straighten them or reinstall the water inlet hose. * Inspect and clean the inlet valve filter after turning off the taps and disconnecting the hoses from the washing machine.
  • B
    Barbara ThompsonSep 4, 2025
    How to fix OE WATER OUTLET ERROR on LG Washer?
    • J
      jasonewingSep 4, 2025
      If you're getting an OE WATER OUTLET ERROR on your LG Washer, the drain hose may be kinked or clogged. Clean and straighten the drain hose. Also, the drain filter might be clogged, so check and clean that as well.

LG F4V5 YP2T Series Specifications

General IconGeneral
BrandLG
ModelF4V5 YP2T Series
CategoryWasher
LanguageEnglish

Related product manuals