To Next PageTo Next PageWhy is the cycle time longer than usual on my LG F4V5RGP0W Washer/Dryer?
If the cycle time on your LG Washer/Dryer is longer than usual, it might be because the load is too small. Add more items to allow the appliance to balance the loads.
Why is the drying time too long on my LG F4V5RGP0W?
If the drying time on your LG Washer/Dryer is too long, make sure the ambient temperature is within an allowable range.
What to do if LG F4V5RGP0W Washer/Dryer is leaking water?
If your LG Washer/Dryer is leaking water, the issue might stem from clogged house drain pipes. Unclog the drain pipe, and contact a plumber if necessary. Alternatively, the leakage could be due to improper drain hose installation or a clogged drain hose. In this case, clean and straighten the drain hose, and regularly check and clean the drain filter.
What to do if my LG F4V5RGP0W displays an OE WATER OUTLET ERROR?
If your LG Washer/Dryer is showing an OE WATER OUTLET ERROR, it means there's a problem with the water draining. Check the drain hose for any kinks or clogs, and clean and straighten it if necessary. Also, inspect the drain filter for clogs and clean it.
What to do if my LG Washer/Dryer shows PF POWER FAILURE?
If your LG Washer/Dryer shows a PF POWER FAILURE, restart the cycle.
What to do if LG F4V5RGP0W shows UE UNBALANCE ERROR?
If your LG Washer/Dryer displays a UE UNBALANCE ERROR, it could be due to the laundry being too wet or the load being too small. Rearrange the laundry to allow proper spinning, or add 1 or 2 similar items to help balance the load. After adjusting the load, close the door and press the Start/Pause button.
How to solve 1E INLET ERROR on LG F4V5RGP0W?
To solve the 1E INLET ERROR on your LG Washer/Dryer, first check if the water supply is adequate by testing another tap in the house. Ensure the water supply tap is fully open and that the water supply hoses are not kinked; straighten them or reinstall the water inlet hose. Also, inspect and clean the filter of the inlet hose. If water leakage occurs in the aqua stop supply hose and the indicator is red, replace the aqua stop supply hose.
How to fix OE WATER OUTLET ERROR in LG F4V5RGP0W Washer/Dryer?
To fix the OE WATER OUTLET ERROR on your LG Washer/Dryer, check the drain hose for kinks or clogs and straighten or clean it. Also, inspect and clean the drain filter, as a clogged filter can cause this error.
Why is the drying performance too low on my LG F4V5RGP0W?
To improve drying performance on your LG Washer/Dryer, ensure the water supply tap is open and that the drain filter is not clogged. Also, check the load capacity for the selected cycle to avoid overloading. Finally, select the highest spin speed allowed for the wash cycle.
What to do if I have dry problem with my LG Washer/Dryer?
If you are experiencing a drying issue with your LG Washer/Dryer, check the water supply tap. Also, do not overload the appliance and check that the washing machine is draining properly to extract adequate water from the load.
General| Brand | LG |
|---|---|
| Model | F4V5RGP0W |
| Category | Washer/Dryer |
| Language | English |
Introduces safety symbols and categorizes warnings and cautions for safe operation.
Covers general precautions, transport, unpacking, electrical connection, and ventilation requirements.
Covers safe operation practices, preparing laundry, and loading items correctly.
Explains control panel functions, buttons, indicators, and various washing/drying programmes.
Explains common error codes (IE, DE, UE, etc.) and their possible causes and solutions.
