43
OPERATION
ENGLISH
• Avoid using liquid detergent for this
function.
Using the ezDispense
Use the
Dispenser 1
and
Dispenser 2
buttons to set up and control the
ezDispense
function.
A
Dispenser 1
button
B
Dispenser 2
button
C
Liquid detergent indicator
D
Link indicator (Using only liquid
detergent both compartments)
E
Liquid fabric softener indicator
• When the detergent or softener is
insufficient;
- In case of pressing the
Power
button: The LED will blink and the
chime will sound.
- In case of running the appliance: The
LED will blink.
• The default settings are configured to
dispense the detergent of
Dispenser 1
and the fabric softener of
Dispenser 2
.
Changing Dispense Level for a Single
Load
1
Press the
Power
button.
2
Turn the knob to select the desired
cycle.
3
Press the
Dispenser 1
or
Dispenser 2
button to increase or decrease the
dispensed amount from the set
defaults.
*1 The default settings are
configured to dispense
42 ml
of
detergent and
30 ml
of softener for
4-6 kg
of normally soiled laundry.
4
Press the
Start/Pause
button.
Buttons
Indicator
Dispensed
Amount
*1
More (110%)
Normal (100%)
Less (90%)
Off (0%)
global_main.book.book Page 43 Tuesday, May 11, 2021 9:35 AM
To Next Page
Loading...
