Connecting 13
Connecting
2
Attaching the speakers
to the unit
To connect the cable to the unit, press each plastic
nger pad to open the connection terminals on the
unit. Insert the wire and release the nger pad.
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
The speakers contain magnet parts, so
colour irregularity may occur on the TV
screen or PC monitor screen. Please use the
speakers far away from either TV screen or
PC monitor.
Make sure while installing the speakers have
assistants in order to prevent it from falling
and causing injuries to the installer.
>
Caution
Connections to Your
TV
Make one of the following connections, depending
on the capabilities of your existing equipment.
Depending on your TV and other
equipment you wish to connect, there are
various ways you could connect the player.
Use only one of the connections described
in this manual.
Please refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
,
Note
Make sure the unit is connected directly
to the TV. Tune the TV to the correct video
input channel
Do not connect your player via your VCR.
The image could be distorted by the copy
protection system.
>
Caution
To Next Page
Loading...
