LG FB165 - Setting the Clock; Using Your Player as an Alarm Clock; Sleep Timer Setting; Dimmer

Operating 29
Operating
4
Setting the Clock
1. Turn the unit on.
2. Press CLOCK for at least 2 seconds.
3. Choose time mode by pressing
C
/
V
.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press SET to con rm your selection.
5. Select the hours by pressing
C
/
V
.
6. Press SET.
7. Select the minutes by pressing
C
/
V
.
8. Press SET.
Using your player as an alarm
clock
1. Turn the unit on.
2. Press TIMER. Each functions  ashes.
3. Press SET when the function you want to be
woken by is showing.
4. “ON TIME” will be displayed. This is your desired
time to unit turns on. Press
C
/
V
to
change the hours and minutes and press SET to
save.
5. The “OFF TIME” will be displayed. This is your
desired time to unit turns o .
6. Press
C
/
V
to change the hours and
minutes and press SET to save.
7. Press
C
/
V
to change the volume and
press SET to save. The clock icon “
(
“ shows
that the alarm is set.
8. Press TIMER button 2 times. You can check the
setting status.

If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned o .

If you set the clock time and alarm, you
can check the alarm icon “
(
“ by pressing
CLOCK even when the player is turned o .

If you set the clock time and alarm, you
can check the alarm icon “
(
“ and setting
information by pressing TIMER even when
the unit is turned o . Then this function will
working in everyday.
,
Note
Sleep Timer Setting
Press SLEEP repeatedly to select delay time
between 10 and 180 minutes. After the delay time,
unit will turn o .
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.

You can check the remaining time before
the unit turns o .

Press SLEEP. The remaining time appears in
the display window.

Sleep function will working after Dimmer.
,
Note
Dimmer
Press SLEEP once. The display window will be
darkening by half. To cancel it, press SLEEP
repeatedly until dim o . If touch the buttons in
Sleep Timer mode, the buttons will be lightening
for 5 seconds and darkening again.
Turn off the sound temporarily
Press MUTE to mute your unit.
You can mute your unit, for example, to answer
the telephone, the “
q
” is displayed in the display
window.
DEMO
In the power o state, it demonstrates the function
on display window by pressing DEMO. To cancel
the DEMO, press it again.

While DEMO, this unit will keep DEMO
status even if you unplug the power cord
connection.

You can enjoy other functions during
the DEMO. Then the DEMO will pause to
temporary.
- Without input key in 10 sec, the DEMO
will play back automatically.
,
Note