44
PROGRAMMING MODE - SETUP MODE
Entering set up
mode.
You will see LqC1
Button Display
Press the
90°C (194°F)
button.
Press the
75°C (167°F)
or the
60°C (140°F)
button until
appears in the display.
Press the
Start
button.
Press the
75°C (167°F)
or the
60°C (140°F)
button until
appears in the display.
Press the
Start
button.
Display .
Press the
Start
button.
Press
75°C (167°F)
or
60°C (140°F)
button and then
select or
.
One or the other
will display.
Disable
Enable
Press the
Start
button.
The machine sets up the special price day (Sunday),
then advances to the next process automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C
(140°F) button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the 90°C (194°F) button three times.
11-1. How to change to Sunday
Special prices can be enabled/disabled for each day of the week.
NOTE
• As explained on the previous page, similarly, other days can be set up by the same method.
• This function is not applied for opl type.
To Next Page
Loading...
Need help?
General
