63
PROGRAMMING MODE - SETUP MODE
Entering set up
mode.
You will see LqC1
Button Display
Press the
90°C (194°F)
button.
Press the
75°C (167°F)
or the
60°C (140°F)
button until
appears in the display.
Press the
Start
button.
Press the
75°C (167°F)
or the
60°C (140°F)
button until
appears in the display.
30. How to enter the
• Product type
• Currency choice
• Card reader type
• Coin drop type
Structure of
Content of
0 EUK (England)
1 EAP (Australia)
2 ELC (USA)
3 EPN (China)
4 KOR (Korea)
5 EJP (Japan)
6 ECI (Canada)
7 GSC (Philippines)
0 (Pharos)
1 (HP)
0 (Greenwald)
1 (ESD)
0 (ESD, Greenwald, Munzprufer) - Signal Pulse : 50ms
1 (Korea) - Signal Pulse : 100ms
(Heater)
(Non-heater)
NOTE
• Pay means card or coin type.
• Default type is coin type. If you want to change coin type to card type, you need to setup vend
type in fea1. (refer to FEA1 function)
• Free means OPL type.
• Price setting varies by country.
• Set your country from mode. (Refer
How to enter the
)
• After EEPT, reset your country. (Default country is EUK)
To Next Page
Loading...
Need help?
General
