72
PROGRAMMING MODE - COLLECT MODE
Data Name Button Display Description
Entering
the collect
mode
1. Entering the
programming
mode.
Insert service car d(card type), turn on/off toggle
switch (Coin type).
2. 90°C (194°F)
Press the
90°C (194°F)
button until appears
in the display.
3. 75°C (167°F)(+),
60°C (140°F)(-)
Press the
75°C (167°F)(+), 60°C (140°F)(-)
button
until
appears in the display.
4. Start Enter the Collect information data.
5. 75°C (167°F)(+),
60°C (140°F)(-)
xxxx
Move to each data list that you want to check by
pressing with
75°C (167°F) (+)
or
60°C (140°F) (-)
button.
6. Start
xxxx
Display the value of selected data list
7. 90°C (194°F) Move to upper level or Comes back to Idle State
PROGRAMMING MODE -
COLLECT MODE
Collect information data : (display)
The washer collects the usage data so that the owner can check various information like number of
various cycles used, how many times coins used, etc.
Entering the collect mode
❖
Check the collect information reference to the follow lists. The Lists are displayed by abbreviations.
To Next Page
Loading...
Need help?
General
