Additional Information
Specifications
Power Requirements 120 V ~ 60 Hz
Power Consumption
155 W
Networked standby : 0.5 W
(If all network ports are
activated.)
Dimensions (W x H x D)
Approx. 818 mm X
318 mm X 388 mm
(32.2 in X 12.5 in X 15.2 in)
Net Weight Approx. 17.2 kg (37.9 lb)
Bus Power Supply (USB)
5 V 0 1 A
Amplier
(Total RMS output power)
600 W
Design and specications are subject to change without
notice.
Note
y Do Not look directly at the light emitting path when
lighting function is operational.
y If the brightness from the illuminating light source
causes excessive glare and eye discomfort during
operation then turn On room lights or turn Off the
LIGHTING of the unit.
How to disconnect the wireless network
connection or the wireless device
Turn off the unit by pressing the power button for more
than 5 seconds.
Replacement of battery