Operating Instructions
ENGLISH
How to mount onto a wall
1 Use the screws to secure the holder to the
wall or attach the holder side of indoor
unit.
2 To insert the remote control to the holder.
How to insert batteries
1 Remove the cover from the back of the re-
mote control.
- Slide the cover according to the arrow di-
rection.
2 Insert two batteries.
- Be sure that the (+) and (-) directions are
correct.
- Be sure that both batteries are new.
3 Re-attach the cover.
- Slide the cover into back position.
- Do not use rechargeable batteries such bat-
teries are different from standard dry cells in
shape, dimensions, and performance.
- Change the batteries with a new one if the
remote control does not work properly after
using for an extended period of time.
CAUTION
long time, flowing of dry cell liquid may
cause the failure of product, therefore,
remove all dry cells.
two of them all with new ones, and if re-
mote control is not operated properly
even after replacing the dry cells (AAA),
request the service.
used dry cells, and do not throw away
those at the location with heat of fire or
hot air. There will be the danger of ex-
plosion.
!
Remote control preparation
ENGLISH
12 Floor Standing-Type Air Conditioner
To Next Page
Loading...
