LG FRIDGE - Components to install

4
2. Components to install
ⓐ Wood bolting screw ⓑ Wood bolting screw ⓒ Upper bracket bolting screw ⓓ Height adjusting nut
Spec
Quantity
D4×L16
2
M5 6
D4×L12
16
D4×6.5
4M54
-1
D4×L14
4
Spec
Quantity
Spec
Quantity
Spec
Quantity
Spec
Quantity
Spec
Quantity
Spec
Quantity
ⓖ Spanner ⓔ Hinge bolting screw ⓕ Horizontal adjusting leg bolting screw
Parts prepared
before installing
cabinet case
Parts related with
case after
inserting cabinet
case
Parts related with
integrated
cabinet doors
after inserting
product into
cabinet case
Parts related with
finishing work
①
Top cover ② Hinge stand ③ Bracket case ④ Depth adjust Bracket
(hole size = 8mm)
⑧ Case cover
⑥ Bracket case cover
⑤ Hinge cover
⑫ Depth adjusting
bracket
⑬ Depth adjusting
bracket cover
⑪ Top bracket cover ⑩ Top bracket ⑨ Paper jig
1 unit
2 units1 unit
L : 1 unit
R : 1 unit
L : 1 unit
R : 1 unit
1 unit
1 unit
2 units
4 units
1 unit
2 units
2 units 1 unit 2 units
1 unit 2 units 2 units
Cross (+) driver 2m tape rule
These tools are
required but
not supplied
⑦ Depth adjust Bracket
(hole size = 5.5mm)
⒕ Gasket ⒔ Air path cover
⒃ Hinge front
cover
⑭ Depth adjust
bracket cover
⑮ Cap screw
4 units
2 units